Micropump GM Series Service Instructions Manuel d'utilisateur télécharger pdf (Page 9)

MICROPUMP, INC.

A Unit of IDEX Corporation

PO Box 8975, Vancouver, WA 98668-8975 • Phone: 360/253-2008 • Fax: 360/253-8294

MICROPUMP

LIMITED

A Subsidiary of Micropump, Inc.

Howard Road, Eaton Socon, St.

Neots, Cambridgeshire, PE 19 8ET England, • Phone: (44) (0) 1480-356600• Fax: (44) (0) 1480-35630

REVISION

LTR. DESCRIPTION DATE BY

A ORIGINATED PER E14164 1/28/04 CMA

PART NUMBER:

L23154

Page 9 of 9

8.3 Determine proper port location, and position pump assembly accordingly.

8.4 Install 4 bolts and torque to 20 in-lbs.

8.5 Test pump to applicable specifications for the pump/motor combination.

9 Storage

9.1 Prepare the pump for storage by installing plugs into the inlet and outlet ports.

Note: Tape can be used in lieu of plugs for sealing ports.

Remove as much fluid as possible from the pump prior to sealing ports.

9.2 Store the pump in any position in an ambient temperature-humidity environment.

Note: If water is left in the pump, damage may occur if the

temperature drops below freezing.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Micropump GM Series Service Instructions Manuel d'utilisateur Page 9